Menu 0
  • 0 0
Shipping included · Ships from Wilmington, NC · 30-day flock-tested returns
CoopWorx

Setup & support

Instructions & Troubleshooting

Setup help, maintenance, and quick fixes for CoopWorx Feed & Water Silos.

Email Info@CoopWorxUSA.com Call 910-233-0502

AutoFill Valve

Official CoopWorx AutoFill Valve installation steps and a short setup video. Follow the graphic included with your kit.

CoopWorx AutoFill Valve installation instructions: insert 1/4-inch tube, hang bracket, attach tube, connect hose, turn on hose, set-up complete
Official AutoFill Valve installation graphic — tap to open full size

Quick steps

  1. Insert the 1/4-inch tube through the silo wall opening.
  2. Hang the AutoFill bracket on the silo rim.
  3. Attach the 1/4-inch tube to the valve fitting until fully seated.
  4. Connect your garden hose to the adapter.
  5. Turn on the hose and confirm fill.

Troubleshooting

  • Verify the hose is turned on and water is reaching the adapter.
  • Confirm tubing is fully seated in the push-to-connect fittings.
  • Make sure the filter/valve is attached and hanging upright.
  • Check the tubing and hose for kinks.
  • Shut water off before reseating any fittings.
  • If leaking: shut off water, reseat fittings, and email clear photos to Info@CoopWorxUSA.com.

AutoFill setup video

Water Ports

Keep ports clean and seated so birds drink freely and leaks stay rare. Watch the short water-port video, then use the checklist below if something looks off.

Water port video

Care & troubleshooting

  • Keep ports clean — wipe away debris around each opening.
  • Check that each port is fully seated in the silo wall.
  • Inspect for dirt, bedding, or feed stuck in the port.
  • If a port is leaking: empty or shut water off, then reseat or replace the affected port.
  • If it is still unresolved, email photos and your order number to Info@CoopWorxUSA.com.

Wall Mount Silo Set-Up

Official wall-mount graphic for CoopWorx silos. Follow the numbered photos on the sheet — including Z-bar height notes for your birds.

CoopWorx Wall Mount Silo Set-Up official graphic showing six steps: screw Z bar to wall, hanging brackets, hang feeder, tighten clamping knobs, fill and attach lid, setup complete
Official Wall Mount Silo Set-Up graphic — tap to open full size

Feed Silo Stake Mount Set-Up

Drive the ground stake, add the top post (do not hammer the top post), then set the feeder and adjust height.

CoopWorx Feed Silo Stake Mount Set-Up official graphic: place stake, drive flush, place top post, slide post down, set feeder and adjust height
Official Feed Silo Stake Mount Set-Up graphic — tap to open full size

Water Silo X-Base Set-Up

Assemble the X-base plates and post, then set the Water Silo on the stand.

CoopWorx Water Silo X-Base Set-Up official graphic: X-base parts, remove screw, insert screw into base, attach post to base, set-up complete
Official Water Silo X-Base Set-Up graphic — tap to open full size

Still stuck?

Email Info@CoopWorxUSA.com or call 910-233-0502.

Please include your order number and clear photos or a short video of the issue — that helps us get you back up faster.